GE IC800SSD107RS1-CC

Isolation: 1500 Vrms channel-to-logic, 500 Vrms channel-to-channel
Response Time: 1 ms turn-on, 1 ms turn-off
Indicators: Red LEDs for each output point
Power Supply: 24 Vdc ±10 % from external supply
Operating Temperature: 0 °C to +60 °C
Mounting: Single-slot module, plugs directly into Series Six I/O rack
Dimensions: 11.5 in × 4.9 in × 1.9 in (292 mm × 124 mm × 48 mm)

Functional Features

High-current Darlington drivers allow direct control of contactors, solenoids, lamps, and small motors
Short-circuit and overload protection with automatic shutdown and diagnostic LED indication
Removable terminal strip simplifies wiring and replacement
Conformal-coated PCB for harsh environments
Plug-and-play replacement—no jumpers or calibration required

Application Scenarios

Automotive Assembly: Drives clamping cylinders, conveyors, and stack lights
Material Handling: Controls motor contactors for sorters, lifts, and diverters
Packaging Machinery: Activates glue guns, cutters, and reject gates
Water/Wastewater: Switches valve actuators and pump motor starters

Product Brief
GE IC800SSD107RS1-CC is a VersaMotion 750 W Servo Drive with built-in Safe Torque Off, designed for precise motion control of low-inertia servo motors in machines requiring high dynamic performance and integrated safety.

Technical Specifications

Part Number: IC800SSD107RS1-CC
Series: VersaMotion
Power Rating: 750 W continuous, 2.25 kW peak
Input Supply: 220 Vac single-phase, 50/60 Hz, 6 A max
Output Current: 3 A continuous, 9 A peak
Bus Voltage: 310 Vdc
Control Mode: Position, velocity, torque, and interpolation
Feedback: 2500 ppr incremental encoder with Hall sensors
Communication: RS-485 Modbus/RTU, optional CANopen
Safe Torque Off: SIL2 / PL d certified dual-channel STO
Dynamic Brake: Built-in relay and resistor
Protection: Short-circuit, over-voltage, under-voltage, over-temperature, motor over-current
Operating Temperature: 0 °C to +45 °C (derate above 40 °C)
Mounting: Book-style, vertical DIN rail or panel mount
Dimensions: 6.3 in × 3.1 in × 5.5 in (160 mm × 79 mm × 140 mm)

Functional Features

Auto-tuning and gain scheduling adapt to load characteristics for optimized performance
Electronic gearing and camming enable synchronized multi-axis motion
Real-time oscilloscope function via PC software for diagnostics and tuning
LED status ring provides instant indication of drive state and faults
Removable spring-clamp terminals reduce wiring time and improve serviceability
Conformal-coated electronics for protection in dusty or humid environments

Application Scenarios

Packaging Machines: Film feed, sealing, and cut-off axes in vertical form-fill-seal systems
Electronics Assembly: Precision indexing tables and pick-and-place robots
Textile Equipment: Yarn feeders, winding, and tension control drives
Food & Beverage: Labeling, cartoning, and bottling line actuators