GE IC693TCM302

• Parity: None, Even, or Odd
• Stop Bits: 1 or 2
• Isolation: Optically isolated serial ports for noise immunity and ground loop prevention
• Memory: Onboard memory for message buffering and protocol handling
• Power Supply: Powered via backplane; no external power required
• Backplane Current Draw: 350 mA at 5 VDC
• Module Slot Requirement: Occupies one slot in a 5- or 10-slot Series 90-30 rack
• Operating Temperature: 0°C to 60°C
• Storage Temperature: –40°C to 85°C
• Relative Humidity: 5% to 95% non-condensing
• Mounting: DIN rail or chassis mounting using standard Series 90-30 baseplates
• Dimensions: 130 mm (W) × 115 mm (H) × 100 mm (D)
• Weight: Approximately 300 grams

Key Features

• Dual serial ports (RS-232 and RS-485) enable simultaneous connection to multiple devices
• Supports full Modbus RTU master/slave functionality for integration with drives, meters, and third-party equipment
• SNP and SNPX protocols allow communication with other Series 90-30 PLCs and GE HMI systems
• Optical isolation protects the PLC from electrical noise and voltage transients
• Configurable as a communication gateway between different network segments
• LED indicators for power, transmit (TX), receive (RX), and fault status on each port
• Message queuing and buffering for reliable data transmission in high-traffic networks
• Compatible with Proficy Machine Edition (PME) and legacy VersaPro software for configuration
• Firmware upgradeable through programming software or serial connection

Functional Capabilities

• Enables peer-to-peer communication between multiple PLCs
• Facilitates data transfer to SCADA systems, host computers, and data loggers
• Supports polling and messaging functions for remote device control
• Handles high-volume serial data for real-time monitoring and control
• Can act as a Modbus master to poll multiple slave devices on the same network
• Supports free-format communication for custom protocols using ASCII-based messaging
• Provides error detection and retry mechanisms for robust communication

Applications

• Industrial automation systems requiring communication between PLCs and host computers
• Integration of PLCs with SCADA systems using Modbus RTU over RS-485
• Factory floor networks with multiple HMIs, drives, and sensors
• Material handling and conveyor systems using distributed control
• Water and wastewater treatment plants with remote pump stations
• Building management systems connecting to HVAC, lighting, and security devices
• Legacy system upgrades where reliable serial communication is essential

Compatibility and Integration

• Fully compatible with GE Series 90-30 PLC systems including all CPU and I/O modules
• Works with standard 5- and 10-slot baseplates (IC693CHS397, IC693CHS392)
• Integrates seamlessly with Proficy HMI, iFIX, and Cimplicity software
• Connects to barcode readers, printers, and operator terminals via RS-232
• Supports daisy-chained networks using RS-485 for long-distance communication (up to 1200 meters)
• Can be used in conjunction with CPU modules to offload communication tasks

Environmental and Mechanical

• Designed for industrial environments with resistance to electromagnetic interference (EMI)
• Vibration and shock tested to meet industrial standards
• Compact design for high-density control panel installation
• Operating altitude up to 2,000 meters above sea level