GE IC660BBA020

Power Supply: 24/48 VDC, with an operating range of 18 - 56 VDC, maximum power of 8W, 10% max. ripple, and a power supply dropout time of 10ms.
Input/Output Range: Input and output ranges can be configured as 0 - 10 VDC, -10 to +10 VDC, -5 to +5 VDC, 0 - 5 VDC, or 4 - 20 mA (or 1 - 5 VDC).
Resolution: 12 - bit + sign.
Update Rate: Once every 4ms.
Accuracy: Typical is 0.2% of full scale; maximum is 0.5% of full scale (within 50mV on the 10 - volt range, 25 mV on the 5 - volt range, and 100mA on the 4 to 20 mA range).

Isolation: 1500 V block – to – block isolation.
Dimensions: 8.83 inches (22.44 cm) x 3.34 inches (8.48 cm) x 3.91 inches (9.93 cm).
Weight: 4 pounds (1.8 kg).
Heat Dissipation: 6W.

Functional Features

Independent Scaling: Each input and output has independent scaling, allowing for tailored performance to meet specific needs.
Fault Reporting: Fault reports to the host can be enabled or disabled for each input and output.
Input Filter: Selectable input filter time up to 1024 ms, ensuring smooth operation even under varying conditions.
Input Operation Modes: Each input can operate in normal analog input mode or report only its alarm status.
Alarm Limits: Each input has low and high alarm limits in either normal input mode or alarm input mode.
Output Default Values: Power – up default values for each output, and each output can be configured to hold the last state or default if CPU communications are lost.
Diagnostic Functions: It has functions such as input low – alarm and high – alarm detection, open – wire detection on current – mode inputs, input under – range or over – range detection, and output under – range or over – range detection.

Application Scenarios

The GE IC660BBA020 is applicable to various industrial automation scenarios, including process control systems and machine automation systems. It can be used in industries such as manufacturing, chemical, and power, where precise analog input and output control are required.

Show More Show Less